De ATM350a is de ultieme microfoonoplossing voor onopvallende, solide montage op je instrument, van piano tot een 20-delige drumkit. Met een heldere, duidelijke en evenwichtige respons, zelfs bij extreme SPL's, is de ATM350a klaar om je geluid vast te leggen, welk instrument je ook bespeelt. De AT8491P magnetische piano mount biedt echte flexibiliteit op grand en staande piano's. De ATM350PL Cardioïde condensator instrument microfoon met piano mount omvat: ATM350a microfoon, AT8490L zwanenhals (lang), AT8491P piano mount, AT8543 voedingsmodule, AT8468 klittenband bevestiging en een harde draagtas.
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 40 – 20,000 Hz
Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
Impedance: 200 ohms
Maximum Input Sound Level: 159 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Switches: Flat, roll-off
Dynamic Range: 130 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11– 52V DC, 3.5 mA typical
Weight
Microphone: 14.5 g (0.5 oz)
Power Module: 90 g (3.2 oz)
Dimensions
Microphone: 37.8 mm (1.49'') long, 12.2 mm (0.48'') maximum body diameter
Power Module: 92 mm (3.62") long, 18.9 mm (0.74") diameter
Output Connector
Power Module: Integral 3-pin XLRM-type
Cable: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with HIROSE HR10-type connector
Accessories Included: ATM350a cardioid condenser microphone, AT8543 power module, AT8491P UniMount magnetic piano mount, AT8490L UniMount 9" gooseneck, AT8468 violin mount (hook-and-loop fastener), protective carrying case
